Open with table of contents

Track and report settings

You can use the Tracking and Report Settings to configure the way Clearswift Gateway records and stores message data. This is the data accessed by message tracking and the Reports Center to generate system reports and message histories.

Tell me about...

• Data To Be Recorded

  Recording Data enables the Gateway to record information used for queries and reporting. Click Click here to change these settings and select the checkbox to activate data recording.

• Date Range Settings

  Date Range Settings defines the start and end day of a week. By default, the Gateway defines a week as Sunday to Saturday. Click Click here to change these settings. You can select the start and end days using the drop-down menus.

  This setting is used for a number of Date Ranges. Changing the definition of a week will affect all queries using This Week and Last Week parameters.

  Report days begin at 00:00 and end immediately before 00:00:00 on the next day. Therefore, a custom date range between Sunday 2/8/2015 and Saturday 8/8/2015 records data from Sunday, 2/8/2015 00:00 and before Sunday, 9/8/2015 00:00:00.

• Retention Time

  Retention Time determines the period of time for which data is stored by the Clearswift Gateway. You can configure the storage time for two types of data:

  • Summary Reporting

    Data displayed by summary reports generated by the Reports Center. The default storage time for summary reporting data is 30 days, but you can enter a value up to two years (731 days). If you enter a higher value, the Save icon becomes disabled.

  • Detailed Reporting

    Detailed information displayed by drill-down reports and message queries. The default storage time for detailed reporting data is 14 days, but you can enter a value up to two years (731 days). If you enter a higher value, the Save icon becomes disabled.

  Click Click here to change these settings and enter the number of days to store each type of data. Click Save to save your changes.

  If you want to reduce the size of the database by reducing the data retention time, use the Database Optimization page to shrink the database.

How do I...

• Purge the reporting database of old data?

  The database is purged automatically on a daily basis. However you can also manually remove old data at any time.

  In the task panel, click Purge Now. The Gateway begins to purge reporting data when you apply changes to the configuration.

  Purging the database might take a considerable amount of time. You cannot schedule or apply a purge within 21 hours of the previous purge operation.

See also...

• About the Reports Center
• Message Tracking

© 1995–2018 Clearswift Ltd.