Open with table of contents

Configuring Message Settings

You can specify whether or not received headers will be stripped from outbound messages as the message is received by the Gateway. 'Received' headers contain information about your internal mail network such as IP addresses and machine names that you may not wish to expose.

To configure message settings

  1. From the System Center Home page, click SMTP Settings. The SMTP Settings page appears.
  2. Click Advanced Settings to display the Advanced Settings page.
  3. Move the mouse pointer over the Message Settings area and click Click here to change these settings.
  4. Select or clear the Received Headers check box to indicate whether or not to strip 'Received' headers from outbound messages.
  5. Select the Maximum message size check box and enter a size to specify a maximum message size.
  6. Click Save.
  If you change any configuration settings you must apply the new configuration for the new settings to take effect. If the Gateways are configured as a group, any group changes should be applied to each Gateway.

© 1995–2018 Clearswift Ltd.